電源：斷橋鋁門窗設備的公共電壓為380V，接線時需要注意帶電與零線的連接。一般來說，門窗設備制造商會區分不同的顏色。一般來說，帶電導線為黑色或藍色，零線為紅色(取決于每個制造商的情況)。如果帶電導線反向連接，則只需更換帶電導線兩端的兩根導線。

Power supply: The common voltage of the broken bridge aluminum door and window equipment is 380V. When wiring, attention should be paid to the connection between live and neutral lines. Generally speaking, door and window equipment manufacturers will distinguish different colors. Generally speaking, the live wire is black or blue, and the neutral wire is red (depending on the situation of each manufacturer). If the live wire is connected in reverse, only the two wires at both ends of the live wire need to be replaced.

　　氣源：由于斷橋鋁門窗設備的壓料由氣瓶壓縮，特別是斷橋鋁型材加工切割鋸、斷橋鋁型材端銑機、斷橋鋁型材角碼鋸。確保充足的空氣供應是設備使用的前提。氣壓不足會影響斷橋鋁型材雙頭切割鋸的鋸片，從而影響其加工效果。

Gas source: Due to the compression of the pressure material of the broken bridge aluminum door and window equipment by gas cylinders, especially the cutting saw for processing broken bridge aluminum profiles, the end milling machine for broken bridge aluminum profiles, and the angle saw for broken bridge aluminum profiles. Ensuring sufficient air supply is a prerequisite for the use of equipment. Insufficient air pressure can affect the saw blade of the double end cutting saw for broken bridge aluminum profiles, thereby affecting its processing efficiency.

　　一般來說，一套斷橋鋁門窗設備可以保證風壓達到8壓，風量達到0.3。如果設備太多，僅僅依靠空氣泵是不夠的。你需要準備一到兩個油箱。

Generally speaking, a set of broken bridge aluminum door and window equipment can ensure a wind pressure of 8 and an air volume of 0.3. If there are too many devices, relying solely on air pumps is not enough. You need to prepare one to two fuel tanks.

　　空壓機：檢查空壓機連接是否牢固，防止漏氣。

Air compressor: Check if the connection of the air compressor is firm to prevent air leakage.

　　設備部件：鋁門窗斷橋設備種類較多，每種類型設備種類較多。因此，檢查門窗加工設備尤其重要，如切割鋸的氣管塞、鋸片的進出口、鋸頭的左右工作狀態等，調整門窗加工設備切割鋸片的進給速度。調試時，如果鋸片進給速度過快或過慢，可調整門窗設備進給缸上的調速閥，以獲得合適的進給速度。

Equipment components: There are many types of aluminum door and window bridge breaking equipment, and each type of equipment has a variety of types. Therefore, it is particularly important to check the door and window processing equipment, such as the gas pipe plug of the cutting saw, the inlet and outlet of the saw blade, and the left and right working status of the saw head, and adjust the feed rate of the cutting saw blade of the door and window processing equipment. When debugging, if the feed speed of the saw blade is too fast or too slow, the speed control valve on the feed cylinder of the door and window equipment can be adjusted to obtain the appropriate feed speed.

以上就是有關：開齒穿條機 的介紹，想了解更多的內容請點擊：http://yggggs.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to the toothed threading machine. To learn more, please click: http://yggggs.com We will wholeheartedly provide you with full score service. Welcome to call us!